Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Access the SmartServer IoT CMS by clicking the CMS tab on the Configuration UI, or by entering the URL https://[SmartServer IP address]/cms/#/login

    The SmartServer IoT CMS appears similar to the following:



  2. Go to the Devices Types widget and click the Import button (). 



  3. Select the Lon Channel.dtp.zip from the Starter Kit archive → LON Channel folder in the DROP FILE HERE area.



  4. Click IMPORT FILE.

    Notification messages will appear indicating that files are being uploaded and the CPU usage on the main CMS page will show increased activity. (Click  to close All information messages.)



  5. Click BACK on the Device Types widget.

  6. Go to the Devices widget, which will be used to add two LON devices to the system. Take note of the device names and character cases that will be used in creating devices. 

  7. Click the Create button () on the Devices widget to add the FT 6050 EVB device as shown in the figure below (leave the Context field empty):
    • Name: MS-01
    • Device categoryEdge Device



  8. Click NEXT.

  9. Leave the UID field empty and set the following fields as shown in the figure below:
    • Integration method: Guided discovery
    • Owner: SmartServer IoT
    • Driver: LON
    • Device type: 6kEvbMultiSensor

       

  10. Press the service button located on the upper right portion of the FT 6050 EVB board as shown below.



    Doing so populates the UID field with the NID of the FT 6050 EVB board as shown below. (You may need to set the Device type field again.)



  11. Click SAVE

  12. Click the Create button () on the Devices widget to add the Smart Controls SC 100-MP device as shown in the figure below (leave the Context field empty):
    • Name: DIO-01
    • Device categoryEdge Device



  13. Click NEXT.

  14. Leave the UID field empty and set the following fields as shown in the figure below:
    • Integration method: Guided discovery
    • Owner: SmartServer IoT
    • Driver: LON
    • Device type: SC100-MP

       

  15. Press the service button located on the lower left portion of the SC 100-MP device as shown below.



    Doing so populates the UID field with the NID of the SC 100-MP device as shown below. (You may need to set the Device type field again.)



  16. Click SAVE

    At this point, you will have two unprovisioned LON devices (indicated by the blue device fill) newly added to the SmartServer CMS Devices widget as shown below.



  17. Click the DIO-01 and MS-01 devices to select them, and then click the Action button () on the Devices widget and select the Provision selected edge devices action.



    Both the MS-01 and DIO-01 device types are defined to include an application load at provisioning. The application load takes about 2-3 minutes to complete for each device. During this time, you can observe high frequency TX/RX LED activity on the U60. When this action is finished, the device fill device fill for the devices will turn from blue to green as shown below.

    Image Modified

    You now have a pair of LON devices provisioned in the SmartServer IoT.

...