You can use a bitfield data type for a datapoint or property. To access a bitfield within a given data structure, access the affected bits within the container byte which contains the bitfield. The IzoT Interface Interpreter generates utility macros which provide the name of the container byte within the data structure or union, the size of the bit field in bits, and the offset of the least-significant bit of the bit field within the container byte, where the offset counts down from the most significant bit within the byte.
The UNVT_iot_status_flags datapoint type is defined as a structure with four one-bit bitfields. The container is a byte named ___bf00, for bitfield 00. The fault bitfield is defined with a size of 1 and an offset of 1. The fault bit has a numeric value of 0x40 within the ___bf00 byte. The size, offset and container byte are available from the UNVT_iot_status_flags__fault_SIZE, UNVT_iot_status_flags__fault_OFFSET, and UNVT_iot_status_flags__fault_CONTAINER definitions.
To set this bit, perform a logical or of the container byte as shown in this example.
myFlags.UNVT_iot_status_flags__fault_CONTAINER |= 1 << unvt_iot_status_flags__fault_offset
To clear this bit, perform a logical and with the inverse of the bit on the container byte as shown in this example.
myFlags.UNVT_iot_status_flags__fault_CONTAINER &= ~(1 << unvt_iot_status_flags__fault_offset)